3rd February 1999
1. ID3 tag version 2.3.0
1.1. Status of this document
This document is an informal standard and replaces the id3v2.2.0 standard. The informal standard is released so that implementors could have a set standard before a formal standard is set. The formal standard will use another version or revision number if not identical to what is described in this document. The contents in this document may change for clarifications but never for added or altered functionality.
Distribution of this document is unlimited.
This document describes the ID3v2.3.0 standard, which is a more developed version of the ID3v2 informal standard (version [:id3v2-00: 2.2.0]), evolved from the ID3 tagging system. The ID3v2 offers a flexible way of storing information about an audio file within itself to determine its origin and contents. The information may be technical information, such as equalisation curves, as well as related meta information, such as title, performer, copyright etc.
- ID3 tag version 2.3.0
- Conventions in this document
- ID3v2 overview
Declared ID3v2 frames
- Unique file identifier
- Text information frames
- URL link frames
- Involved people list
- Music CD identifier
- Event timing codes
- MPEG location lookup table
- Synchronised tempo codes
- Unsychronised lyrics/text transcription
- Synchronised lyrics/text
- Relative volume adjustment
- Attached picture
- General encapsulated object
- Play counter
- Recommended buffer size
- Audio encryption
- Linked information
- Position synchronisation frame
- Ownership frame
- Commercial frame
- Encryption method registration
- Group identification registration
- Private frame
- The unsynchronisation scheme
- Author's Address
2. Conventions in this document
In the examples, text within "" is a text string exactly as it appears in a file. Numbers preceded with $ are hexadecimal and numbers preceded with % are binary. $xx is used to indicate a byte with unknown content. %x is used to indicate a bit with unknown content. The most significant bit (MSB) of a byte is called 'bit 7' and the least significant bit (LSB) is called 'bit 0'.
A tag is the whole tag described in this document. A frame is a block of information in the tag. The tag consists of a header, frames and optional padding. A field is a piece of information; one value, a string etc. A numeric string is a string that consists of the characters 0-9 only.
3. ID3v2 overview
The two biggest design goals were to be able to implement ID3v2 without disturbing old software too much and that ID3v2 should be as flexible and expandable as possible.
The first criterion is met by the simple fact that the MPEG decoding software uses a syncsignal, embedded in the audiostream, to 'lock on to' the audio. Since the ID3v2 tag doesn't contain a valid syncsignal, no software will attempt to play the tag. If, for any reason, coincidence make a syncsignal appear within the tag it will be taken care of by the 'unsynchronisation scheme' described in section 5.
The second criterion has made a more noticeable impact on the design of the ID3v2 tag. It is constructed as a container for several information blocks, called frames, whose format need not be known to the software that encounters them. At the start of every frame there is an identifier that explains the frames' format and content, and a size descriptor that allows software to skip unknown frames.
If a total revision of the ID3v2 tag should be needed, there is a version number and a size descriptor in the ID3v2 header.
The bitorder in ID3v2 is most significant bit first (MSB). The byteorder in multibyte numbers is most significant byte first (e.g. $12345678 would be encoded $12 34 56 78).
It is permitted to include padding after all the final frame (at the end of the ID3 tag), making the size of all the frames together smaller than the size given in the head of the tag. A possible purpose of this padding is to allow for adding a few additional frames or enlarge existing frames within the tag without having to rewrite the entire file. The value of the padding bytes must be $00.
3.1. ID3v2 header
The ID3v2 tag header, which should be the first information in the file, is 10 bytes as follows:
ID3v2/file identifier "ID3" ID3v2 version $03 00 ID3v2 flags %abc00000 ID3v2 size 4 * %0xxxxxxx
The first three bytes of the tag are always "ID3" to indicate that this is an ID3v2 tag, directly followed by the two version bytes. The first byte of ID3v2 version is it's major version, while the second byte is its revision number. In this case this is ID3v2.3.0. All revisions are backwards compatible while major versions are not. If software with ID3v2.2.0 and below support should encounter version three or higher it should simply ignore the whole tag. Version and revision will never be $FF.
The version is followed by one the ID3v2 flags field, of which currently only three flags are used.
- a - Unsynchronisation
Bit 7 in the 'ID3v2 flags' indicates whether or not unsynchronisation is used (see section 5 for details); a set bit indicates usage.
- b - Extended header
The second bit (bit 6) indicates whether or not the header is followed by an extended header. The extended header is described in section 3.2.
- c - Experimental indicator
- The third bit (bit 5) should be used as an 'experimental indicator'. This flag should always be set when the tag is in an experimental stage.
All the other flags should be cleared. If one of these undefined flags are set that might mean that the tag is not readable for a parser that does not know the flags function.
The ID3v2 tag size is encoded with four bytes where the most significant bit (bit 7) is set to zero in every byte, making a total of 28 bits. The zeroed bits are ignored, so a 257 bytes long tag is represented as $00 00 02 01.
The ID3v2 tag size is the size of the complete tag after unsychronisation, including padding, excluding the header but not excluding the extended header (total tag size - 10). Only 28 bits (representing up to 256MB) are used in the size description to avoid the introducuction of 'false syncsignals'.
An ID3v2 tag can be detected with the following pattern:
$49 44 33 yy yy xx zz zz zz zz
Where yy is less than $FF, xx is the 'flags' byte and zz is less than $80.
3.2. ID3v2 extended header
The extended header contains information that is not vital to the correct parsing of the tag information, hence the extended header is optional.
Extended header size $xx xx xx xx Extended Flags $xx xx Size of padding $xx xx xx xx
Where the 'Extended header size', currently 6 or 10 bytes, excludes itself. The 'Size of padding' is simply the total tag size excluding the frames and the headers, in other words the padding. The extended header is considered separate from the header proper, and as such is subject to unsynchronisation.
The extended flags are a secondary flag set which describes further attributes of the tag. These attributes are currently defined as follows
- x - CRC data present
- If this flag is set four bytes of CRC-32 data is appended to the extended header. The CRC should be calculated before unsynchronisation on the data between the extended header and the padding, i.e. the frames and only the frames.
Total frame CRC $xx xx xx xx
3.3. ID3v2 frame overview
As the tag consists of a tag header and a tag body with one or more frames, all the frames consists of a frame header followed by one or more fields containing the actual information. The layout of the frame header:
Frame ID $xx xx xx xx (four characters) Size $xx xx xx xx Flags $xx xx
The frame ID made out of the characters capital A-Z and 0-9. Identifiers beginning with "X", "Y" and "Z" are for experimental use and free for everyone to use, without the need to set the experimental bit in the tag header. Have in mind that someone else might have used the same identifier as you. All other identifiers are either used or reserved for future use.
The frame ID is followed by a size descriptor, making a total header size of ten bytes in every frame. The size is calculated as frame size excluding frame header (frame size - 10).
In the frame header the size descriptor is followed by two flags bytes. These flags are described in section 3.3.1.
There is no fixed order of the frames' appearance in the tag, although it is desired that the frames are arranged in order of significance concerning the recognition of the file. An example of such order: UFID, TIT2, MCDI, TRCK ...
A tag must contain at least one frame. A frame must be at least 1 byte big, excluding the header.
If nothing else is said a string is represented as ISO-8859-1 characters in the range $20 - $FF. Such strings are represented as <text string>, or <full text string> if newlines are allowed, in the frame descriptions. All Unicode strings use 16-bit unicode 2.0 (ISO/IEC 10646-1:1993, UCS-2). Unicode strings must begin with the Unicode BOM ($FF FE or $FE FF) to identify the byte order.
All numeric strings and URLs are always encoded as ISO-8859-1. Terminated strings are terminated with $00 if encoded with ISO-8859-1 and $00 00 if encoded as unicode. If nothing else is said newline character is forbidden. In ISO-8859-1 a new line is represented, when allowed, with $0A only. Frames that allow different types of text encoding have a text encoding description byte directly after the frame size. If ISO-8859-1 is used this byte should be $00, if Unicode is used it should be $01. Strings dependent on encoding is represented as <text string according to encoding>, or <full text string according to encoding> if newlines are allowed. Any empty Unicode strings which are NULL-terminated may have the Unicode BOM followed by a Unicode NULL ($FF FE 00 00 or $FE FF 00 00).
The three byte language field is used to describe the language of the frame's content, according to ISO-639-2.
All URLs may be relative, e.g. "picture.png", "../doc.txt".
If a frame is longer than it should be, e.g. having more fields than specified in this document, that indicates that additions to the frame have been made in a later version of the ID3v2 standard. This is reflected by the revision number in the header of the tag.
3.3.1. Frame header flags
In the frame header the size descriptor is followed by two flags bytes. All unused flags must be cleared. The first byte is for 'status messages' and the second byte is for encoding purposes. If an unknown flag is set in the first byte the frame may not be changed without the bit cleared. If an unknown flag is set in the second byte it is likely to not be readable. The flags field is defined as follows.
- a - Tag alter preservation
- This flag tells the software what to do with this frame if it is unknown and the tag is altered in any way. This applies to all kinds of alterations, including adding more padding and reordering the frames.
0 Frame should be preserved. 1 Frame should be discarded.
- b - File alter preservation
- This flag tells the software what to do with this frame if it is unknown and the file, excluding the tag, is altered. This does not apply when the audio is completely replaced with other audio data.
0 Frame should be preserved. 1 Frame should be discarded.
- c - Read only
- This flag, if set, tells the software that the contents of this frame is intended to be read only. Changing the contents might break something, e.g. a signature. If the contents are changed, without knowledge in why the frame was flagged read only and without taking the proper means to compensate, e.g. recalculating the signature, the bit should be cleared.
- i - Compression
- This flag indicates whether or not the frame is compressed.
0 Frame is not compressed. 1 Frame is compressed using [#ZLIB zlib] with 4 bytes for 'decompressed size' appended to the frame header.
- j - Encryption
This flag indicates wether or not the frame is enrypted. If set one byte indicating with which method it was encrypted will be appended to the frame header. See section 4.26. for more information about encryption method registration.
0 Frame is not encrypted. 1 Frame is encrypted.
- k - Grouping identity
- This flag indicates whether or not this frame belongs in a group with other frames. If set a group identifier byte is added to the frame header. Every frame with the same group identifier belongs to the same group.
0 Frame does not contain group information 1 Frame contains group information
Some flags indicates that the frame header is extended with additional information. This information will be added to the frame header in the same order as the flags indicating the additions. I.e. the four bytes of decompressed size will precede the encryption method byte. These additions to the frame header, while not included in the frame header size but are included in the 'frame size' field, are not subject to encryption or compression.
3.4. Default flags
The default settings for the frames described in this document can be divided into the following classes. The flags may be set differently if found more suitable by the software.
- Discarded if tag is altered, discarded if file is altered.
- Discarded if tag is altered, preserved if file is altered.
- Preserved if tag is altered, discarded if file is altered.
- Preserved if tag is altered, preserved if file is altered.
- The rest of the frames.
4. Declared ID3v2 frames
The following frames are declared in this draft.
4.1. Unique file identifier
This frame's purpose is to be able to identify the audio file in a database that may contain more information relevant to the content. Since standardisation of such a database is beyond this document, all frames begin with a null-terminated string with a URL containing an email address, or a link to a location where an email address can be found, that belongs to the organisation responsible for this specific database implementation. Questions regarding the database should be sent to the indicated email address. The URL should not be used for the actual database queries. The string "http://www.id3.org/dummy/ufid.html" should be used for tests. Software that isn't told otherwise may safely remove such frames. The 'Owner identifier' must be non-empty (more than just a termination). The 'Owner identifier' is then followed by the actual identifier, which may be up to 64 bytes. There may be more than one "UFID" frame in a tag, but only one with the same 'Owner identifier'.
<Header for 'Unique file identifier', ID: "UFID"> Owner identifier <text string> $00 Identifier <up to 64 bytes binary data>
4.2. Text information frames
The text information frames are the most important frames, containing information like artist, album and more. There may only be one text information frame of its kind in an tag. If the textstring is followed by a termination ($00 (00)) all the following information should be ignored and not be displayed. All text frame identifiers begin with "T". Only text frame identifiers begin with "T", with the exception of the "TXXX" frame. All the text information frames have the following format:
<Header for 'Text information frame', ID: "T000" - "TZZZ", excluding "TXXX" described in 4.2.2.> Text encoding $xx Information <text string according to encoding>
4.2.1. Text information frames - details
- The 'Album/Movie/Show title' frame is intended for the title of the recording(/source of sound) which the audio in the file is taken from.
- The 'BPM' frame contains the number of beats per minute in the mainpart of the audio. The BPM is an integer and represented as a numerical string.
- The 'Composer(s)' frame is intended for the name of the composer(s). They are seperated with the "/" character.
The 'Content type', which previously was stored as a one byte numeric value only, is now a numeric string. You may use one or several of the types as ID3v1.1 did or, since the category list would be impossible to maintain with accurate and up to date categories, define your own.
References to the ID3v1 genres can be made by, as first byte, enter "(" followed by a number from the genres list (appendix A) and ended with a ")" character. This is optionally followed by a refinement, e.g. "(21)" or "(4)Eurodisco". Several references can be made in the same frame, e.g. "(51)(39)". If the refinement should begin with a "(" character it should be replaced with "((", e.g. "((I can figure out any genre)" or "(55)((I think...)". The following new content types is defined in ID3v2 and is implemented in the same way as the numerig content types, e.g. "(RX)".
RX Remix CR Cover
- The 'Copyright message' frame, which must begin with a year and a space character (making five characters), is intended for the copyright holder of the original sound, not the audio file itself. The absence of this frame means only that the copyright information is unavailable or has been removed, and must not be interpreted to mean that the sound is public domain. Every time this field is displayed the field must be preceded with "Copyright © ".
- The 'Date' frame is a numeric string in the DDMM format containing the date for the recording. This field is always four characters long.
- The 'Playlist delay' defines the numbers of milliseconds of silence between every song in a playlist. The player should use the "ETC" frame, if present, to skip initial silence and silence at the end of the audio to match the 'Playlist delay' time. The time is represented as a numeric string.
- The 'Encoded by' frame contains the name of the person or organisation that encoded the audio file. This field may contain a copyright message, if the audio file also is copyrighted by the encoder.
- The 'Lyricist(s)/Text writer(s)' frame is intended for the writer(s) of the text or lyrics in the recording. They are seperated with the "/" character.
- The 'File type' frame indicates which type of audio this tag defines. The following type and refinements are defined:
MPG MPEG Audio /1 MPEG 1/2 layer I /2 MPEG 1/2 layer II /3 MPEG 1/2 layer III /2.5 MPEG 2.5 /AAC Advanced audio compression VQF Transform-domain Weighted Interleave Vector Quantization PCM Pulse Code Modulated audio
but other types may be used, not for these types though. This is used in a similar way to the predefined types in the "TMED" frame, but without parentheses. If this frame is not present audio type is assumed to be "MPG".
- The 'Time' frame is a numeric string in the HHMM format containing the time for the recording. This field is always four characters long.
- The 'Content group description' frame is used if the sound belongs to a larger category of sounds/music. For example, classical music is often sorted in different musical sections (e.g. "Piano Concerto", "Weather - Hurricane").
- The 'Title/Songname/Content description' frame is the actual name of the piece (e.g. "Adagio", "Hurricane Donna").
- The 'Subtitle/Description refinement' frame is used for information directly related to the contents title (e.g. "Op. 16" or "Performed live at Wembley").
- The 'Initial key' frame contains the musical key in which the sound starts. It is represented as a string with a maximum length of three characters. The ground keys are represented with "A","B","C","D","E", "F" and "G" and halfkeys represented with "b" and "#". Minor is represented as "m". Example "Cbm". Off key is represented with an "o" only.
- The 'Language(s)' frame should contain the languages of the text or lyrics spoken or sung in the audio. The language is represented with three characters according to ISO-639-2. If more than one language is used in the text their language codes should follow according to their usage.
- The 'Length' frame contains the length of the audiofile in milliseconds, represented as a numeric string.
- The 'Media type' frame describes from which media the sound originated. This may be a text string or a reference to the predefined media types found in the list below. References are made within "(" and ")" and are optionally followed by a text refinement, e.g. "(MC) with four channels". If a text refinement should begin with a "(" character it should be replaced with "((" in the same way as in the "TCO" frame. Predefined refinements is appended after the media type, e.g. "(CD/A)" or "(VID/PAL/VHS)".
DIG Other digital media /A Analog transfer from media ANA Other analog media /WAC Wax cylinder /8CA 8-track tape cassette CD CD /A Analog transfer from media /DD DDD /AD ADD /AA AAD LD Laserdisc /A Analog transfer from media TT Turntable records /33 33.33 rpm /45 45 rpm /71 71.29 rpm /76 76.59 rpm /78 78.26 rpm /80 80 rpm MD MiniDisc /A Analog transfer from media DAT DAT /A Analog transfer from media /1 standard, 48 kHz/16 bits, linear /2 mode 2, 32 kHz/16 bits, linear /3 mode 3, 32 kHz/12 bits, nonlinear, low speed /4 mode 4, 32 kHz/12 bits, 4 channels /5 mode 5, 44.1 kHz/16 bits, linear /6 mode 6, 44.1 kHz/16 bits, 'wide track' play DCC DCC /A Analog transfer from media DVD DVD /A Analog transfer from media TV Television /PAL PAL /NTSC NTSC /SECAM SECAM VID Video /PAL PAL /NTSC NTSC /SECAM SECAM /VHS VHS /SVHS S-VHS /BETA BETAMAX RAD Radio /FM FM /AM AM /LW LW /MW MW TEL Telephone /I ISDN MC MC (normal cassette) /4 4.75 cm/s (normal speed for a two sided cassette) /9 9.5 cm/s /I Type I cassette (ferric/normal) /II Type II cassette (chrome) /III Type III cassette (ferric chrome) /IV Type IV cassette (metal) REE Reel /9 9.5 cm/s /19 19 cm/s /38 38 cm/s /76 76 cm/s /I Type I cassette (ferric/normal) /II Type II cassette (chrome) /III Type III cassette (ferric chrome) /IV Type IV cassette (metal)
- The 'Original album/movie/show title' frame is intended for the title of the original recording (or source of sound), if for example the music in the file should be a cover of a previously released song.
- The 'Original filename' frame contains the preferred filename for the file, since some media doesn't allow the desired length of the filename. The filename is case sensitive and includes its suffix.
- The 'Original lyricist(s)/text writer(s)' frame is intended for the text writer(s) of the original recording, if for example the music in the file should be a cover of a previously released song. The text writers are seperated with the "/" character.
- The 'Original artist(s)/performer(s)' frame is intended for the performer(s) of the original recording, if for example the music in the file should be a cover of a previously released song. The performers are seperated with the "/" character.
- The 'Original release year' frame is intended for the year when the original recording, if for example the music in the file should be a cover of a previously released song, was released. The field is formatted as in the "TYER" frame.
- The 'File owner/licensee' frame contains the name of the owner or licensee of the file and it's contents.
- The 'Lead artist(s)/Lead performer(s)/Soloist(s)/Performing group' is used for the main artist(s). They are seperated with the "/" character.
- The 'Band/Orchestra/Accompaniment' frame is used for additional information about the performers in the recording.
- The 'Conductor' frame is used for the name of the conductor.
- The 'Interpreted, remixed, or otherwise modified by' frame contains more information about the people behind a remix and similar interpretations of another existing piece.
- The 'Part of a set' frame is a numeric string that describes which part of a set the audio came from. This frame is used if the source described in the "TALB" frame is divided into several mediums, e.g. a double CD. The value may be extended with a "/" character and a numeric string containing the total number of parts in the set. E.g. "1/2".
- The 'Publisher' frame simply contains the name of the label or publisher.
- The 'Track number/Position in set' frame is a numeric string containing the order number of the audio-file on its original recording. This may be extended with a "/" character and a numeric string containing the total numer of tracks/elements on the original recording. E.g. "4/9".
- The 'Recording dates' frame is a intended to be used as complement to the "TYER", "TDAT" and "TIME" frames. E.g. "4th-7th June, 12th June" in combination with the "TYER" frame.
- The 'Internet radio station name' frame contains the name of the internet radio station from which the audio is streamed.
- The 'Internet radio station owner' frame contains the name of the owner of the internet radio station from which the audio is streamed.
- The 'Size' frame contains the size of the audiofile in bytes, excluding the ID3v2 tag, represented as a numeric string.
- The 'ISRC' frame should contain the International Standard Recording Code (ISRC) (12 characters).
- The 'Software/Hardware and settings used for encoding' frame includes the used audio encoder and its settings when the file was encoded. Hardware refers to hardware encoders, not the computer on which a program was run.
- The 'Year' frame is a numeric string with a year of the recording. This frames is always four characters long (until the year 10000).
4.2.2. User defined text information frame
This frame is intended for one-string text information concerning the audiofile in a similar way to the other "T"-frames. The frame body consists of a description of the string, represented as a terminated string, followed by the actual string. There may be more than one "TXXX" frame in each tag, but only one with the same description.
<Header for 'User defined text information frame', ID: "TXXX"> Text encoding $xx Description <text string according to encoding> $00 (00) Value <text string according to encoding>
4.3. URL link frames
With these frames dynamic data such as webpages with touring information, price information or plain ordinary news can be added to the tag. There may only be one URL link frame of its kind in an tag, except when stated otherwise in the frame description. If the textstring is followed by a termination ($00 (00)) all the following information should be ignored and not be displayed. All URL link frame identifiers begins with "W". Only URL link frame identifiers begins with "W". All URL link frames have the following format:
<Header for 'URL link frame', ID: "W000" - "WZZZ", excluding "WXXX" described in 4.3.2.> URL <text string>
4.3.1. URL link frames - details
- The 'Commercial information' frame is a URL pointing at a webpage with information such as where the album can be bought. There may be more than one "WCOM" frame in a tag, but not with the same content.
- The 'Official audio file webpage' frame is a URL pointing at a file specific webpage.
- The 'Official artist/performer webpage' frame is a URL pointing at the artists official webpage. There may be more than one "WOAR" frame in a tag if the audio contains more than one performer, but not with the same content.
- The 'Official audio source webpage' frame is a URL pointing at the official webpage for the source of the audio file, e.g. a movie.
- The 'Official internet radio station homepage' contains a URL pointing at the homepage of the internet radio station.
- The 'Payment' frame is a URL pointing at a webpage that will handle the process of paying for this file.
- The 'Publishers official webpage' frame is a URL pointing at the official wepage for the publisher.
4.3.2. User defined URL link frame
This frame is intended for URL links concerning the audiofile in a similar way to the other "W"-frames. The frame body consists of a description of the string, represented as a terminated string, followed by the actual URL. The URL is always encoded with ISO-8859-1. There may be more than one "WXXX" frame in each tag, but only one with the same description.
<Header for 'User defined URL link frame', ID: "WXXX"> Text encoding $xx Description <text string according to encoding> $00 (00) URL <text string>
4.4. Involved people list
Since there might be a lot of people contributing to an audio file in various ways, such as musicians and technicians, the 'Text information frames' are often insufficient to list everyone involved in a project. The 'Involved people list' is a frame containing the names of those involved, and how they were involved. The body simply contains a terminated string with the involvement directly followed by a terminated string with the involvee followed by a new involvement and so on. There may only be one "IPLS" frame in each tag.
<Header for 'Involved people list', ID: "IPLS"> Text encoding $xx People list strings <text strings according to encoding>
4.5. Music CD identifier
This frame is intended for music that comes from a CD, so that the CD can be identified in databases such as the CDDB. The frame consists of a binary dump of the Table Of Contents, TOC, from the CD, which is a header of 4 bytes and then 8 bytes/track on the CD plus 8 bytes for the 'lead out' making a maximum of 804 bytes. The offset to the beginning of every track on the CD should be described with a four bytes absolute CD-frame address per track, and not with absolute time. This frame requires a present and valid "TRCK" frame, even if the CD's only got one track. There may only be one "MCDI" frame in each tag.
<Header for 'Music CD identifier', ID: "MCDI"> CD TOC <binary data>
4.6. Event timing codes
This frame allows synchronisation with key events in a song or sound. The header is:
<Header for 'Event timing codes', ID: "ETCO"> Time stamp format $xx
Where time stamp format is:
$01 Absolute time, 32 bit sized, using MPEG frames as unit $02 Absolute time, 32 bit sized, using milliseconds as unit
Abolute time means that every stamp contains the time from the beginning of the file.
Followed by a list of key events in the following format:
Type of event $xx Time stamp $xx (xx ...)
The 'Time stamp' is set to zero if directly at the beginning of the sound or after the previous event. All events should be sorted in chronological order. The type of event is as follows:
$00 padding (has no meaning) $01 end of initial silence $02 intro start $03 mainpart start $04 outro start $05 outro end $06 verse start $07 refrain start $08 interlude start $09 theme start $0A variation start $0B key change $0C time change $0D momentary unwanted noise (Snap, Crackle & Pop) $0E sustained noise $0F sustained noise end $10 intro end $11 mainpart end $12 verse end $13 refrain end $14 theme end $15-$DF reserved for future use $E0-$EF not predefined sync 0-F $F0-$FC reserved for future use $FD audio end (start of silence) $FE audio file ends $FF one more byte of events follows (all the following bytes with the value $FF have the same function)
Terminating the start events such as "intro start" is not required. The 'Not predefined sync's ($E0-EF) are for user events. You might want to synchronise your music to something, like setting of an explosion on-stage, turning on your screensaver etc.
There may only be one "ETCO" frame in each tag.
4.7. MPEG location lookup table
To increase performance and accuracy of jumps within a MPEG audio file, frames with timecodes in different locations in the file might be useful. The ID3v2 frame includes references that the software can use to calculate positions in the file. After the frame header is a descriptor of how much the 'frame counter' should increase for every reference. If this value is two then the first reference points out the second frame, the 2nd reference the 4th frame, the 3rd reference the 6th frame etc. In a similar way the 'bytes between reference' and 'milliseconds between reference' points out bytes and milliseconds respectively.
Each reference consists of two parts; a certain number of bits, as defined in 'bits for bytes deviation', that describes the difference between what is said in 'bytes between reference' and the reality and a certain number of bits, as defined in 'bits for milliseconds deviation', that describes the difference between what is said in 'milliseconds between reference' and the reality. The number of bits in every reference, i.e. 'bits for bytes deviation'+'bits for milliseconds deviation', must be a multiple of four. There may only be one "MLLT" frame in each tag.
<Header for 'Location lookup table', ID: "MLLT"> MPEG frames between reference $xx xx Bytes between reference $xx xx xx Milliseconds between reference $xx xx xx Bits for bytes deviation $xx Bits for milliseconds dev. $xx
Then for every reference the following data is included;
Deviation in bytes %xxx.... Deviation in milliseconds %xxx....
4.8. Synchronised tempo codes
For a more accurate description of the tempo of a musical piece this frame might be used. After the header follows one byte describing which time stamp format should be used. Then follows one or more tempo codes. Each tempo code consists of one tempo part and one time part. The tempo is in BPM described with one or two bytes. If the first byte has the value $FF, one more byte follows, which is added to the first giving a range from 2 - 510 BPM, since $00 and $01 is reserved. $00 is used to describe a beat-free time period, which is not the same as a music-free time period. $01 is used to indicate one single beat-stroke followed by a beat-free period.
The tempo descriptor is followed by a time stamp. Every time the tempo in the music changes, a tempo descriptor may indicate this for the player. All tempo descriptors should be sorted in chronological order. The first beat-stroke in a time-period is at the same time as the beat description occurs. There may only be one "SYTC" frame in each tag.
<Header for 'Synchronised tempo codes', ID: "SYTC"> Time stamp format $xx Tempo data <binary data>
Where time stamp format is:
$01 Absolute time, 32 bit sized, using MPEG frames as unit $02 Absolute time, 32 bit sized, using milliseconds as unit
Abolute time means that every stamp contains the time from the beginning of the file.
4.9. Unsychronised lyrics/text transcription
This frame contains the lyrics of the song or a text transcription of other vocal activities. The head includes an encoding descriptor and a content descriptor. The body consists of the actual text. The 'Content descriptor' is a terminated string. If no descriptor is entered, 'Content descriptor' is $00 (00) only. Newline characters are allowed in the text. There may be more than one 'Unsynchronised lyrics/text transcription' frame in each tag, but only one with the same language and content descriptor.
<Header for 'Unsynchronised lyrics/text transcription', ID: "USLT"> Text encoding $xx Language $xx xx xx Content descriptor <text string according to encoding> $00 (00) Lyrics/text <full text string according to encoding>
4.10. Synchronised lyrics/text
This is another way of incorporating the words, said or sung lyrics, in the audio file as text, this time, however, in sync with the audio. It might also be used to describing events e.g. occurring on a stage or on the screen in sync with the audio. The header includes a content descriptor, represented with as terminated textstring. If no descriptor is entered, 'Content descriptor' is $00 (00) only.
<Header for 'Synchronised lyrics/text', ID: "SYLT"> Text encoding $xx Language $xx xx xx Time stamp format $xx Content type $xx Content descriptor <text string according to encoding> $00 (00)
$00 ISO-8859-1 character set is used => $00 is sync identifier. $01 Unicode character set is used => $00 00 is sync identifier.
$00 is other $01 is lyrics $02 is text transcription $03 is movement/part name (e.g. "Adagio") $04 is events (e.g. "Don Quijote enters the stage") $05 is chord (e.g. "Bb F Fsus") $06 is trivia/'pop up' information
Time stamp format is:
$01 Absolute time, 32 bit sized, using MPEG frames as unit $02 Absolute time, 32 bit sized, using milliseconds as unit
Abolute time means that every stamp contains the time from the beginning of the file.
The text that follows the frame header differs from that of the unsynchronised lyrics/text transcription in one major way. Each syllable (or whatever size of text is considered to be convenient by the encoder) is a null terminated string followed by a time stamp denoting where in the sound file it belongs. Each sync thus has the following structure:
Terminated text to be synced (typically a syllable) Sync identifier (terminator to above string) $00 (00) Time stamp $xx (xx ...)
The 'time stamp' is set to zero or the whole sync is omitted if located directly at the beginning of the sound. All time stamps should be sorted in chronological order. The sync can be considered as a validator of the subsequent string.
Newline ($0A) characters are allowed in all "SYLT" frames and should be used after every entry (name, event etc.) in a frame with the content type $03 - $04.
A few considerations regarding whitespace characters: Whitespace separating words should mark the beginning of a new word, thus occurring in front of the first syllable of a new word. This is also valid for new line characters. A syllable followed by a comma should not be broken apart with a sync (both the syllable and the comma should be before the sync).
An example: The "USLT" passage
"Strangers in the night" $0A "Exchanging glances"
would be "SYLT" encoded as:
"Strang" $00 xx xx "ers" $00 xx xx " in" $00 xx xx " the" $00 xx xx " night" $00 xx xx 0A "Ex" $00 xx xx "chang" $00 xx xx "ing" $00 xx xx "glan" $00 xx xx "ces" $00 xx xx
There may be more than one "SYLT" frame in each tag, but only one with the same language and content descriptor.
This frame is indended for any kind of full text information that does not fit in any other frame. It consists of a frame header followed by encoding, language and content descriptors and is ended with the actual comment as a text string. Newline characters are allowed in the comment text string. There may be more than one comment frame in each tag, but only one with the same language and content descriptor.
<Header for 'Comment', ID: "COMM"> Text encoding $xx Language $xx xx xx Short content descrip. <text string according to encoding> $00 (00) The actual text <full text string according to encoding>
4.12. Relative volume adjustment
This is a more subjective function than the previous ones. It allows the user to say how much he wants to increase/decrease the volume on each channel while the file is played. The purpose is to be able to align all files to a reference volume, so that you don't have to change the volume constantly. This frame may also be used to balance adjust the audio. If the volume peak levels are known then this could be described with the 'Peak volume right' and 'Peak volume left' field. If Peakvolume is not known these fields could be left zeroed or, if no other data follows, be completely omitted. There may only be one "RVAD" frame in each tag.
<Header for 'Relative volume adjustment', ID: "RVAD"> Increment/decrement %00xxxxxx Bits used for volume descr. $xx Relative volume change, right $xx xx (xx ...) Relative volume change, left $xx xx (xx ...) Peak volume right $xx xx (xx ...) Peak volume left $xx xx (xx ...)
In the increment/decrement field bit 0 is used to indicate the right channel and bit 1 is used to indicate the left channel. 1 is increment and 0 is decrement.
The 'bits used for volume description' field is normally $10 (16 bits) for MPEG 2 layer I, II and III and MPEG 2.5. This value may not be $00. The volume is always represented with whole bytes, padded in the beginning (highest bits) when 'bits used for volume description' is not a multiple of eight.
This datablock is then optionally followed by a volume definition for the left and right back channels. If this information is appended to the frame the first two channels will be treated as front channels. In the increment/decrement field bit 2 is used to indicate the right back channel and bit 3 for the left back channel.
Relative volume change, right back $xx xx (xx ...) Relative volume change, left back $xx xx (xx ...) Peak volume right back $xx xx (xx ...) Peak volume left back $xx xx (xx ...)
If the center channel adjustment is present the following is appended to the existing frame, after the left and right back channels. The center channel is represented by bit 4 in the increase/decrease field.
Relative volume change, center $xx xx (xx ...) Peak volume center $xx xx (xx ...)
If the bass channel adjustment is present the following is appended to the existing frame, after the center channel. The bass channel is represented by bit 5 in the increase/decrease field.
Relative volume change, bass $xx xx (xx ...) Peak volume bass $xx xx (xx ...)
This is another subjective, alignment frame. It allows the user to predefine an equalisation curve within the audio file. There may only be one "EQUA" frame in each tag.
<Header of 'Equalisation', ID: "EQUA"> Adjustment bits $xx
The 'adjustment bits' field defines the number of bits used for representation of the adjustment. This is normally $10 (16 bits) for MPEG 2 layer I, II and III and MPEG 2.5. This value may not be $00.
This is followed by 2 bytes + ('adjustment bits' rounded up to the nearest byte) for every equalisation band in the following format, giving a frequency range of 0 - 32767Hz:
Increment/decrement %x (MSB of the Frequency) Frequency (lower 15 bits) Adjustment $xx (xx ...)
The increment/decrement bit is 1 for increment and 0 for decrement. The equalisation bands should be ordered increasingly with reference to frequency. All frequencies don't have to be declared. The equalisation curve in the reading software should be interpolated between the values in this frame. Three equal adjustments for three subsequent frequencies. A frequency should only be described once in the frame.
Yet another subjective one. You may here adjust echoes of different kinds. Reverb left/right is the delay between every bounce in ms. Reverb bounces left/right is the number of bounces that should be made. $FF equals an infinite number of bounces. Feedback is the amount of volume that should be returned to the next echo bounce. $00 is 0%, $FF is 100%. If this value were $7F, there would be 50% volume reduction on the first bounce, 50% of that on the second and so on. Left to left means the sound from the left bounce to be played in the left speaker, while left to right means sound from the left bounce to be played in the right speaker.
'Premix left to right' is the amount of left sound to be mixed in the right before any reverb is applied, where $00 id 0% and $FF is 100%. 'Premix right to left' does the same thing, but right to left. Setting both premix to $FF would result in a mono output (if the reverb is applied symmetric). There may only be one "RVRB" frame in each tag.
<Header for 'Reverb', ID: "RVRB"> Reverb left (ms) $xx xx Reverb right (ms) $xx xx Reverb bounces, left $xx Reverb bounces, right $xx Reverb feedback, left to left $xx Reverb feedback, left to right $xx Reverb feedback, right to right $xx Reverb feedback, right to left $xx Premix left to right $xx Premix right to left $xx
4.15. Attached picture
This frame contains a picture directly related to the audio file. Image format is the MIME type and subtype for the image. In the event that the MIME media type name is omitted, "image/" will be implied. The "image/png" or "image/jpeg" picture format should be used when interoperability is wanted. Description is a short description of the picture, represented as a terminated textstring. The description has a maximum length of 64 characters, but may be empty. There may be several pictures attached to one file, each in their individual "APIC" frame, but only one with the same content descriptor. There may only be one picture with the picture type declared as picture type $01 and $02 respectively. There is the possibility to put only a link to the image file by using the 'MIME type' "-->" and having a complete URL instead of picture data. The use of linked files should however be used sparingly since there is the risk of separation of files.
<Header for 'Attached picture', ID: "APIC"> Text encoding $xx MIME type <text string> $00 Picture type $xx Description <text string according to encoding> $00 (00) Picture data <binary data>
$00 Other $01 32x32 pixels 'file icon' (PNG only) $02 Other file icon $03 Cover (front) $04 Cover (back) $05 Leaflet page $06 Media (e.g. lable side of CD) $07 Lead artist/lead performer/soloist $08 Artist/performer $09 Conductor $0A Band/Orchestra $0B Composer $0C Lyricist/text writer $0D Recording Location $0E During recording $0F During performance $10 Movie/video screen capture $11 A bright coloured fish $12 Illustration $13 Band/artist logotype $14 Publisher/Studio logotype
4.16. General encapsulated object
In this frame any type of file can be encapsulated. After the header, 'Frame size' and 'Encoding' follows 'MIME type' represented as as a terminated string encoded with ISO-8859-1. The filename is case sensitive and is encoded as 'Encoding'. Then follows a content description as terminated string, encoded as 'Encoding'. The last thing in the frame is the actual object. The first two strings may be omitted, leaving only their terminations. There may be more than one "GEOB" frame in each tag, but only one with the same content descriptor.
<Header for 'General encapsulated object', ID: "GEOB"> Text encoding $xx MIME type <text string> $00 Filename <text string according to encoding> $00 (00) Content description $00 (00) Encapsulated object <binary data>
4.17. Play counter
This is simply a counter of the number of times a file has been played. The value is increased by one every time the file begins to play. There may only be one "PCNT" frame in each tag. When the counter reaches all one's, one byte is inserted in front of the counter thus making the counter eight bits bigger. The counter must be at least 32-bits long to begin with.
<Header for 'Play counter', ID: "PCNT"> Counter $xx xx xx xx (xx ...)
The purpose of this frame is to specify how good an audio file is. Many interesting applications could be found to this frame such as a playlist that features better audiofiles more often than others or it could be used to profile a person's taste and find other 'good' files by comparing people's profiles. The frame is very simple. It contains the email address to the user, one rating byte and a four byte play counter, intended to be increased with one for every time the file is played. The email is a terminated string. The rating is 1-255 where 1 is worst and 255 is best. 0 is unknown. If no personal counter is wanted it may be omitted. When the counter reaches all one's, one byte is inserted in front of the counter thus making the counter eight bits bigger in the same away as the play counter ("PCNT"). There may be more than one "POPM" frame in each tag, but only one with the same email address.
<Header for 'Popularimeter', ID: "POPM"> Email to user <text string> $00 Rating $xx Counter $xx xx xx xx (xx ...)
4.19. Recommended buffer size
Sometimes the server from which a audio file is streamed is aware of transmission or coding problems resulting in interruptions in the audio stream. In these cases, the size of the buffer can be recommended by the server using this frame. If the 'embedded info flag' is true (1) then this indicates that an ID3 tag with the maximum size described in 'Buffer size' may occur in the audiostream. In such case the tag should reside between two MPEG frames, if the audio is MPEG encoded. If the position of the next tag is known, 'offset to next tag' may be used. The offset is calculated from the end of tag in which this frame resides to the first byte of the header in the next. This field may be omitted. Embedded tags are generally not recommended since this could render unpredictable behaviour from present software/hardware.
For applications like streaming audio it might be an idea to embed tags into the audio stream though. If the clients connects to individual connections like HTTP and there is a possibility to begin every transmission with a tag, then this tag should include a 'recommended buffer size' frame. If the client is connected to a arbitrary point in the stream, such as radio or multicast, then the 'recommended buffer size' frame should be included in every tag. Every tag that is picked up after the initial/first tag is to be considered as an update of the previous one. E.g. if there is a "TIT2" frame in the first received tag and one in the second tag, then the first should be 'replaced' with the second.
The 'Buffer size' should be kept to a minimum. There may only be one "RBUF" frame in each tag.
<Header for 'Recommended buffer size', ID: "RBUF"> Buffer size $xx xx xx Embedded info flag %0000000x Offset to next tag $xx xx xx xx
4.20. Audio encryption
This frame indicates if the actual audio stream is encrypted, and by whom. Since standardization of such encryption scheme is beyond this document, all "AENC" frames begin with a terminated string with a URL containing an email address, or a link to a location where an email address can be found, that belongs to the organisation responsible for this specific encrypted audio file. Questions regarding the encrypted audio should be sent to the email address specified. If a $00 is found directly after the 'Frame size' and the audiofile indeed is encrypted, the whole file may be considered useless.
After the 'Owner identifier', a pointer to an unencrypted part of the audio can be specified. The 'Preview start' and 'Preview length' is described in frames. If no part is unencrypted, these fields should be left zeroed. After the 'preview length' field follows optionally a datablock required for decryption of the audio. There may be more than one "AENC" frames in a tag, but only one with the same 'Owner identifier'.
<Header for 'Audio encryption', ID: "AENC"> Owner identifier <text string> $00 Preview start $xx xx Preview length $xx xx Encryption info <binary data>
4.21. Linked information
To keep space waste as low as possible this frame may be used to link information from another ID3v2 tag that might reside in another audio file or alone in a binary file. It is recommended that this method is only used when the files are stored on a CD-ROM or other circumstances when the risk of file seperation is low. The frame contains a frame identifier, which is the frame that should be linked into this tag, a URL field, where a reference to the file where the frame is given, and additional ID data, if needed. Data should be retrieved from the first tag found in the file to which this link points. There may be more than one "LINK" frame in a tag, but only one with the same contents. A linked frame is to be considered as part of the tag and has the same restrictions as if it was a physical part of the tag (i.e. only one "RVRB" frame allowed, whether it's linked or not).
<Header for 'Linked information', ID: "LINK"> Frame identifier $xx xx xx URL <text string> $00 ID and additional data <text string(s)>
Frames that may be linked and need no additional data are "IPLS", "MCID", "ETCO", "MLLT", "SYTC", "RVAD", "EQUA", "RVRB", "RBUF", the text information frames and the URL link frames.
The "TXXX", "APIC", "GEOB" and "AENC" frames may be linked with the content descriptor as additional ID data.
The "COMM", "SYLT" and "USLT" frames may be linked with three bytes of language descriptor directly followed by a content descriptor as additional ID data.
4.22. Position synchronisation frame
This frame delivers information to the listener of how far into the audio stream he picked up; in effect, it states the time offset of the first frame in the stream. The frame layout is:
<Head for 'Position synchronisation', ID: "POSS"> Time stamp format $xx Position $xx (xx ...)
Where time stamp format is:
and position is where in the audio the listener starts to receive, i.e. the beginning of the next frame. If this frame is used in the beginning of a file the value is always 0. There may only be one "POSS" frame in each tag.
4.24. Ownership frame
The ownership frame might be used as a reminder of a made transaction or, if signed, as proof. Note that the "USER" and "TOWN" frames are good to use in conjunction with this one. The frame begins, after the frame ID, size and encoding fields, with a 'price payed' field. The first three characters of this field contains the currency used for the transaction, encoded according to ISO-4217 alphabetic currency code. Concatenated to this is the actual price payed, as a numerical string using "." as the decimal separator. Next is an 8 character date string (YYYYMMDD) followed by a string with the name of the seller as the last field in the frame. There may only be one "OWNE" frame in a tag.
<Header for 'Ownership frame', ID: "OWNE"> Text encoding $xx Price payed <text string> $00 Date of purch. <text string> Seller <text string according to encoding>
4.25. Commercial frame
This frame enables several competing offers in the same tag by bundling all needed information. That makes this frame rather complex but it's an easier solution than if one tries to achieve the same result with several frames. The frame begins, after the frame ID, size and encoding fields, with a price string field. A price is constructed by one three character currency code, encoded according to ISO-4217 alphabetic currency code, followed by a numerical value where "." is used as decimal seperator. In the price string several prices may be concatenated, seperated by a "/" character, but there may only be one currency of each type.
The price string is followed by an 8 character date string in the format YYYYMMDD, describing for how long the price is valid. After that is a contact URL, with which the user can contact the seller, followed by a one byte 'received as' field. It describes how the audio is delivered when bought according to the following list:
$00 Other $01 Standard CD album with other songs $02 Compressed audio on CD $03 File over the Internet $04 Stream over the Internet $05 As note sheets $06 As note sheets in a book with other sheets $07 Music on other media $08 Non-musical merchandise
Next follows a terminated string with the name of the seller followed by a terminated string with a short description of the product. The last thing is the ability to include a company logotype. The first of them is the 'Picture MIME type' field containing information about which picture format is used. In the event that the MIME media type name is omitted, "image/" will be implied. Currently only "image/png" and "image/jpeg" are allowed. This format string is followed by the binary picture data. This two last fields may be omitted if no picture is to attach.
<Header for 'Commercial frame', ID: "COMR"> Text encoding $xx Price string <text string> $00 Valid until <text string> Contact URL <text string> $00 Received as $xx Name of seller <text string according to encoding> $00 (00) Description <text string according to encoding> $00 (00) Picture MIME type <string> $00 Seller logo <binary data>
4.26. Encryption method registration
To identify with which method a frame has been encrypted the encryption method must be registered in the tag with this frame. The 'Owner identifier' is a null-terminated string with a URL containing an email address, or a link to a location where an email address can be found, that belongs to the organisation responsible for this specific encryption method. Questions regarding the encryption method should be sent to the indicated email address. The 'Method symbol' contains a value that is associated with this method throughout the whole tag. Values below $80 are reserved. The 'Method symbol' may optionally be followed by encryption specific data. There may be several "ENCR" frames in a tag but only one containing the same symbol and only one containing the same owner identifier. The method must be used somewhere in the tag. See section 3.3.1, flag j for more information.
<Header for 'Encryption method registration', ID: "ENCR"> Owner identifier <text string> $00 Method symbol $xx Encryption data <binary data>
4.27. Group identification registration
This frame enables grouping of otherwise unrelated frames. This can be used when some frames are to be signed. To identify which frames belongs to a set of frames a group identifier must be registered in the tag with this frame. The 'Owner identifier' is a null-terminated string with a URL containing an email address, or a link to a location where an email address can be found, that belongs to the organisation responsible for this grouping. Questions regarding the grouping should be sent to the indicated email address. The 'Group symbol' contains a value that associates the frame with this group throughout the whole tag. Values below $80 are reserved. The 'Group symbol' may optionally be followed by some group specific data, e.g. a digital signature. There may be several "GRID" frames in a tag but only one containing the same symbol and only one containing the same owner identifier. The group symbol must be used somewhere in the tag. See section 3.3.1, flag j for more information.
<Header for 'Group ID registration', ID: "GRID"> Owner identifier <text string> $00 Group symbol $xx Group dependent data <binary data>
4.28. Private frame
This frame is used to contain information from a software producer that its program uses and does not fit into the other frames. The frame consists of an 'Owner identifier' string and the binary data. The 'Owner identifier' is a null-terminated string with a URL containing an email address, or a link to a location where an email address can be found, that belongs to the organisation responsible for the frame. Questions regarding the frame should be sent to the indicated email address. The tag may contain more than one "PRIV" frame but only with different contents. It is recommended to keep the number of "PRIV" frames as low as possible.
<Header for 'Private frame', ID: "PRIV"> Owner identifier <text string> $00 The private data <binary data>
5. The unsynchronisation scheme
The only purpose of the 'unsynchronisation scheme' is to make the ID3v2 tag as compatible as possible with existing software. There is no use in 'unsynchronising' tags if the file is only to be processed by new software. Unsynchronisation may only be made with MPEG 2 layer I, II and III and MPEG 2.5 files.
Whenever a false synchronisation is found within the tag, one zeroed byte is inserted after the first false synchronisation byte. The format of a correct sync that should be altered by ID3 encoders is as follows:
And should be replaced with:
%11111111 00000000 111xxxxx
This has the side effect that all $FF 00 combinations have to be altered, so they won't be affected by the decoding process. Therefore all the $FF 00 combinations have to be replaced with the $FF 00 00 combination during the unsynchronisation.
To indicate usage of the unsynchronisation, the first bit in 'ID3 flags' should be set. This bit should only be set if the tag contains a, now corrected, false synchronisation. The bit should only be clear if the tag does not contain any false synchronisations.
Do bear in mind, that if a compression scheme is used by the encoder, the unsynchronisation scheme should be applied *afterwards*. When decoding a compressed, 'unsynchronised' file, the 'unsynchronisation scheme' should be parsed first, decompression afterwards.
If the last byte in the tag is $FF, and there is a need to eliminate false synchronisations in the tag, at least one byte of padding should be added.
Copyright © Martin Nilsson 1998. All Rights Reserved.
This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that a reference to this document is included on all such copies and derivative works. However, this document itself may not be modified in any way and reissued as the original document.
The limited permissions granted above are perpetual and will not be revoked.
This document and the information contained herein is provided on an "AS IS" basis and THE AUTHORS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
[CDDB] Compact Disc Data Base http://www.cddb.com
[ID3v2] Martin Nilsson, "ID3v2 informal standard".
[ISO-639-2] ISO/FDIS 639-2. Codes for the representation of names of languages, Part 2: Alpha-3 code. Technical committee / subcommittee: TC 37 / SC 2
[ISO-4217] ISO 4217:1995. Codes for the representation of currencies and funds. Technical committee / subcommittee: TC 68
[ISO-8859-1] ISO/IEC DIS 8859-1. 8-bit single-byte coded graphic character sets, Part 1: Latin alphabet No. 1. Technical committee / subcommittee: JTC 1 / SC 2
[ISRC] ISO 3901:1986 International Standard Recording Code (ISRC). Technical committee / subcommittee: TC 46 / SC 9
[JFIF] JPEG File Interchange Format, version 1.02, http://www.w3.org/Graphics/JPEG/jfif.txt
[MIME] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996., ftp://ftp.isi.edu/in-notes/rfc2045.txt
[MPEG] ISO/IEC 11172-3:1993. Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s, Part 3: Audio. Technical committee / subcommittee: JTC 1 / SC 29 and ISO/IEC 13818-3:1995 Generic coding of moving pictures and associated audio information, Part 3: Audio. Technical committee / subcommittee: JTC 1 / SC 29 and ISO/IEC DIS 13818-3 Generic coding of moving pictures and associated audio information, Part 3: Audio (Revision of ISO/IEC 13818-3:1995)
[PNG] Portable Network Graphics, version 1.0, http://www.w3.org/TR/REC-png-multi.html
[UNICODE] ISO/IEC 10646-1:1993. Universal Multiple-Octet Coded Character Set (UCS), Part 1: Architecture and Basic Multilingual Plane. Technical committee / subcommittee: JTC 1 / SC 2, http://www.unicode.org
[URL] T. Berners-Lee, L. Masinter & M. McCahill, "Uniform Resource Locators (URL).", RFC 1738, December 1994., ftp://ftp.isi.edu/in-notes/rfc1738.txt
[ZLIB] P. Deutsch, Aladdin Enterprises & J-L. Gailly, "ZLIB Compressed Data Format Specification version 3.3", RFC 1950, May 1996., url:ftp://ftp.isi.edu/in-notes/rfc1950.txt
8.1. Appendix A - Genre List from ID3v1
The following genres is defined in ID3v1
0. Blues 1. Classic Rock 2. Country 3. Dance 4. Disco 5. Funk 6. Grunge 7. Hip-Hop 8. Jazz 9. Metal 10. New Age 11. Oldies 12. Other 13. Pop 14. R&B 15. Rap 16. Reggae 17. Rock 18. Techno 19. Industrial 20. Alternative 21. Ska 22. Death Metal 23. Pranks 24. Soundtrack 25. Euro-Techno 26. Ambient 27. Trip-Hop 28. Vocal 29. Jazz+Funk 30. Fusion 31. Trance 32. Classical 33. Instrumental 34. Acid 35. House 36. Game 37. Sound Clip 38. Gospel 39. Noise 40. AlternRock 41. Bass 42. Soul 43. Punk 44. Space 45. Meditative 46. Instrumental Pop 47. Instrumental Rock 48. Ethnic 49. Gothic 50. Darkwave 51. Techno-Industrial 52. Electronic 53. Pop-Folk 54. Eurodance 55. Dream 56. Southern Rock 57. Comedy 58. Cult 59. Gangsta 60. Top 40 61. Christian Rap 62. Pop/Funk 63. Jungle 64. Native American 65. Cabaret 66. New Wave 67. Psychadelic 68. Rave 69. Showtunes 70. Trailer 71. Lo-Fi 72. Tribal 73. Acid Punk 74. Acid Jazz 75. Polka 76. Retro 77. Musical 78. Rock & Roll 79. Hard Rock
The following genres are Winamp extensions
80. Folk 81. Folk-Rock 82. National Folk 83. Swing 84. Fast Fusion 85. Bebob 86. Latin 87. Revival 88. Celtic 89. Bluegrass 90. Avantgarde 91. Gothic Rock 92. Progressive Rock 93. Psychedelic Rock 94. Symphonic Rock 95. Slow Rock 96. Big Band 97. Chorus 98. Easy Listening 99. Acoustic 100. Humour 101. Speech 102. Chanson 103. Opera 104. Chamber Music 105. Sonata 106. Symphony 107. Booty Bass 108. Primus 109. Porn Groove 110. Satire 111. Slow Jam 112. Club 113. Tango 114. Samba 115. Folklore 116. Ballad 117. Power Ballad 118. Rhythmic Soul 119. Freestyle 120. Duet 121. Punk Rock 122. Drum Solo 123. A cappella 124. Euro-House 125. Dance Hall
9. Author's Address
Rydsven 246 C. 30
S-584 34 Linkoping
Email: nilsson at id3.org
57 Pechey Street
Email: dirk at id3.org
Alsttersgatan 5 A. 34
S-584 35 Linkoping
Email: johan at id3.org