The Audience is informed
How is MP3 built?
Most people with a little knowledge in MP3 files know that the sound is divided into smaller parts and compressed with a psycoacoustic model. This smaller pieces of the audio is then put into something called 'frames', which is a little datablock with a header. I'll focus on that header in this text. |
|
The layer is defined with the two layers bits. They are oddly defined as
0 0 |
Not defined |
0 1 |
Layer III |
1 0 |
Layer II |
1 1 |
Layer I |
With this information and the information in the bitrate field we can determine the bitrate of the audio (in kbit/s) according to this table.
Bitrate |
MPEG-1, |
MPEG-1, |
MPEG-1, |
MPEG-2, |
MPEG-2, |
MPEG-2, |
0 0 0 0 |
|
|||||
0 0 0 1 |
32 |
32 |
32 |
32 |
32 |
8 |
0 0 1 0 |
64 |
48 |
40 |
64 |
48 |
16 |
0 0 1 1 |
96 |
56 |
48 |
96 |
56 |
24 |
0 1 0 0 |
128 |
64 |
56 |
128 |
64 |
32 |
0 1 0 1 |
160 |
80 |
64 |
160 |
80 |
64 |
0 1 1 0 |
192 |
96 |
80 |
192 |
96 |
80 |
0 1 1 1 |
224 |
112 |
96 |
224 |
112 |
56 |
1 0 0 0 |
256 |
128 |
112 |
256 |
128 |
64 |
1 0 0 1 |
288 |
160 |
128 |
288 |
160 |
128 |
1 0 1 0 |
320 |
192 |
160 |
320 |
192 |
160 |
1 0 1 1 |
352 |
224 |
192 |
352 |
224 |
112 |
1 1 0 0 |
384 |
256 |
224 |
384 |
256 |
128 |
1 1 0 1 |
416 |
320 |
256 |
416 |
320 |
256 |
1 1 1 0 |
448 |
384 |
320 |
448 |
384 |
320 |
1 1 1 1 |
|
|||||
The sample rate is described in the frequency field. These values is dependent of which MPEG standard is used according to the following table.
Frequency |
MPEG-1 |
MPEG-2 |
0 0 |
44100 Hz |
22050 Hz |
0 1 |
48000 Hz |
24000 Hz |
1 0 |
32000 Hz |
16000 Hz |
1 1 |
|
|
Three bits is not needed in the decoding process at all. These are the copyright bit, original home bit and the private bit. The copyright has the same meaning as the copyright bit on CDs and DAT tapes, i.e. telling that it is illegal to copy the contents if the bit is set. The original home bit indicates, if set, that the frame is located on its original media. No one seems to know what the privat bit is good for.
If the protection bit is NOT set then the frame header is followed by a 16 bit checksum, inserted before the audio data. If the padding bit is set then the frame is padded with an extra byte. Knowing this the size of the complete frame can be calculated with the following formula
FrameSize = 144 * BitRate / SampleRate
when the padding bit is cleared and
FrameSize = (144 * BitRate / SampleRate) + 1
when the padding bit is set.The !frameSize is of course an integer. If for an example BitRate=128000, SampleRate=44100 and the padding bit is cleared, then the FrameSize = 144 * 128000 / 44100 = 417
The mode field is used to tell which sort of stereo/mono encoding that has been used. The purpose of the mode extension field is different for different layers, but I really don't know exactly what it's for.
Mode value |
mode |
0 0 |
Stereo |
0 1 |
Joint stereo |
1 0 |
Dual channel |
1 1 |
Mono |
The last field is the emphasis field. It is used to sort of 're-equalize' the sound after a Dolby-like noise supression. This is not very used and will probably never be. The following noise supression model is used
Emphasis value |
Emphasis method |
0 0 |
none |
0 1 |
50/15ms |
1 0 |
|
1 1 |
CCITT j.17 |